

Geogrid is a high quality heavy duty ground reinforcement tile and cellular paving system and is made of recycled polyethylene to increase robustness and strength. Geogrids take up to 30 tonne axle load and up to 350 tonnes/metre squared.
Geogrids are ideal for reinforcement of many areas including driveways, golf courses, paths, paddocks and gateways. Geogrids are tough, flexible and built to withstand up to a 30 tonne axle load. With low installation costs, Geogrids can be filled with grass or gravel to improve appearance on site and to withstand harsh conditions are constructed from 100% recycled polyolefin that is UV, weather and frost resistant.
If you need sustainable grass reinforcement then the Geogrids system is the way forward. Each grid is 495mm x 495mm with a 40mm depth and therefore 4 grid tiles cover 1m2. From just £12.70 per square metre, Geogrids are a cost effective way of stabilising a surface. Each grid locks to its neighbour, giving a solid, level surface for vehicles and pedestrians.




| Key Benefits and Features | |
| Up to 30 tonne axle load | |
| High Strength (up to 350 tonnes/metre squared) | |
| Quick and easy to install reducing on site costs | |
| Low transport and handling costs | |
| Sustainable and environmentally friendly | |
| Aesthetic - grass or decorative gravel infill | |
| Semi or permanent ground reinforcement | |
| High strength durability yet lightweight | |
| Minimal maintenance | |
| Non-slip and crack proof | |
| Weatherproof, frost and UV resistant | |
| Cut to size | |
| Dimensionally stable | |
| Non expanding | |
| Surface reinforcement with natural drainage | |
| Prevents gravel migration & soil erosion | |
| Provides water dispersion and SUDS | |
| Applications: | |
| Construction sites | |
| Green car parking areas | |
| Private lanes and access roads including emergency access | |
| Event Parking | |
| Pathways and drives | |
| Golf courses and Buggy Paths | |
| Landscapes | |
| Equestrian and livestock facilities | |
| Green roof and rooftop gardens | |
| River and road embankments | |
| Private Airfields | |
| Towpaths | |
| Embankment Stabilisation | |
| Residential Driveways | |
| Emergency Access Routes | |
| Helicopter Landing Pads | |
| Cycle Routes | |
| Outdoor Events | |
| Infiltration Basins | |
| Road Extensions and Widening | |
| Pedestrian Access Ways | |
Grid Area: 495mm x 495mm x 40mm
Wall Thickness: 4mm
Wall Depth: 40mm
Weight: 5.4kg/m2
Number of tiles per m2: 4
Load Capacity: up to 350 tonnes/m2
Axle Weight: Up to 30 tonnes
M2 per pallet: 30m2
Gross Weight per pallet: 192kg
Material: Low density polyethylene 100% recycled
Estimated Installation Time: 100m2 per person per hour (depending upon ground preparation)
Base Specifications: Minimum base recommended: 250mm for Car Parking and 450mm for heavier vehicles
The weight load distribution performance of Geo Grids is subject solely to ground conditions, weight and type of vehicle or plant. Grassform Plant Hire Ltd always recommends that a site survey be carried out to determine weight loading and ground conditions. Grassform Plant Hire Ltd, its agents or employees are not liable for any damage to existing ground or property through the use of Geo Grids. Geo Grids should not be confused with effective, but imported, products like Bodpave, Netlon, Netpave, Ecogrid, Gridforce, Grasstrax, GTTrax, SCS Integra, Hoofmark, Geogrid, Golpa, Perfo, Terragrid, Ritter, GroundGuard, Nidagravel, GrassProtecta, Farmura Matrix or ADPave.
30 layers of 4 tiles = 30m2
120 pieces per pallet
Tiles are pre-connected in a one m2 sheet
Loaded pallet weight 192kg (approx)